Intramolecular Alkyne Coupling in the Reaction of 1,8-bis(phenylethynyl)naphthalene with Pt2Ru4(CO)18

The reaction of Pt₂Ru₄(CO)₁₈, 1 with 1,8-bis(phenylethynyl)naphthalene, 2 has yielded two metal carbonyl cluster complexes: Ru₂(CO)₆[- ²-C₁₀H₆C₄Ph₂], 3 (60% yield) and Ru₂Pt(CO)₆[- ²-C₁₀H₆C₄Ph₂]₂, 4 (8% yield). Both compounds were characterized by a single crystal X-ray diffraction analysis. Both products were formed as a result of fragmentation of the Pt₂Ru₄ cluster of 1. Compound 3 contains two ruthenium atoms. They are bridged by a tricyclic C₁₀H₆C₄Ph₂ ligand formed by the coupling of the two -carbon atoms of the alkyne groups. The -carbon atoms of the alkynes are -bonded to one of the ruthenium atoms to form a metallacycle and this entire group is -bonded to the second ruthenium atom. Compound 4 contains two ruthenium atoms with a platinum atom between them. This molecule contains two tricyclic C₁₀H₆C₄Ph₂ ligands similar to that in 3, and two metallacycles formed by coordination of the -carbon atoms of both ligands to the platinum atom. One ligand is -bonded to each of the ruthenium atoms.     

Pt/Ce0.75Zr0.25O2的催化性能及其氧移动性的 18O 同位素交换表征

 采用浸渍法制备了Pt/Ce0.75Zr0.25O2催化剂,考察了催化剂对乙醇及CO的氧化活性,并采用 18O 同位素交换、乙醇程序升温表面反应(C2H5OH-TPSR)、一氧化碳程序升温脱附(CO-TPD)和程序升温还原(H2-TPR)等技术对催化剂进行了表征. 结果表明, Pt/Ce0.75Zr0.25O2催化剂表现出较高的乙醇和CO氧化活性,其催化活性随着Pt负载量的增加而提高. 当Pt负载量为3%时,活性最高. 继续增加Pt负载量,催化剂活性下降. C2H5OH-TPSR和CO-TPD结果表明,催化剂对乙醇或CO的氧化活性与从催化剂表面脱附出来的CO2量有对应关系, CO2脱附量越大,催化剂活性越高. 18O 同位素交换结果表明,表面氧交换能力与其氧化活性有一定对应关系,催化剂的表面氧交换能力越高,氧化活性越高.     

Chemistry of phosphine-borane adducts at platinum centers: synthesis and reactivity of PtII complexes with phosphinoborane ligands

Reaction of [Pt(PEt(3))(3)] with the primary and secondary phosphine-borane adducts PhRPH x BH(3) (R=H, Ph) resulted in oxidative addition of a P-H bond at the Pt(0) center to afford the complexes trans-[PtH(PPhR x BH(3))(PEt(3))(2)] (1: R=H; 2: R=Ph). The products 1 and 2 were characterized by (1)H, (11)B, (13)C, (31)P, and (195)Pt NMR spectroscopy, and the molecular structures were verified by X-ray crystallography. In both cases, a trans arrangement of the hydride ligand with respect to the phosphidoborane ligand was observed. When 2 was treated with PhPH(2) x BH(3), a novel phosphidoborane ligand-exchange reaction occurred which yielded 1 and Ph(2)PH x BH(3). Treatment of 2 with one equivalent of depe (depe=1,2-bis(diethylphosphino)ethane) resulted in the formation of the complex cis-[PtH(PPh(2) x BH(3))(depe)] (3), in which the hydride ligand and the phosphidoborane ligand are in a cis arrangement. Treatment of 3 with PhPH(2) x BH(3) was found to result in an exchange of the phosphidoborane ligands to give the complex cis-[PtH(PPhH x BH(3))(depe)] (4) and Ph(2)PH x BH(3). Complex 4 was found to undergo further reaction in the presence of PhPH(2) x BH(3) to give meso-cis-[Pt(PPhH x BH(3))(2)(depe)] (5) and rac-cis-[Pt(PPhH x BH(3))(2)(depe)] (6).     

纳米金标记电化学检测DNA特异性结合蛋白

将单分子发夹寡核苷酸固相延伸形成双链寡核苷酸, 以纳米金颗粒标记NF-κB并银染放大, 采用阳极溶出电位法对NF-κB进行检测. 结果表明, 本法检测序列特异性蛋白质具有高度特异性、高灵敏度和快速等特点, 为转录因子调控机制、开放阅读框识别和功能基因检测等的研究提供了有利工具.     

Carbon nanotube composite coated platinum electrode for detection of Cr(III) in real samples

This paper demonstrates the application of composite multi-walled carbon nanotube (MWNT) polyvinylchloride (MWNT-PVC) based on 1,5-diphenylcarbazide as chromium ionophore in potentiometric measurement. The sensor shows a good Nernstian slope of 19.52 ± 0.40 mV/decade in a wide linear range concentration of 6.3 × 10⁻⁸ to 1.0 × 10⁻² M for Cr(NO₃)₃. The detection limit of this electrode was found to be 3.2 × 10⁻⁸ M of Cr(NO₃)₃ and is applicable in a pH range of 3.0-6.8. It has a short response time of about 10 s. This chromium electrode has a good selectivity over 16 various metal ions. The practical analytical utility of this electrode was demonstrated by measurement of Cr(III) in drinking water and mineral water samples without any serious preliminary pre-treatment and chromium in multivitamin.     

A bifunctional platinum(II) complex capable of intercalation and hydrogen-bonding interactions with DNA: binding studies and cytotoxicity

The interactions of [Pt(CNN)(4-dpt)]PF(6), (1; 4-dpt=2,4-diamino-6-(4-pyridyl)-1,3,5-triazine, HCNN=6-phenyl-2,2'-bipyridine) with double-stranded DNA, poly(dA-dT)(2), and poly(dG-dC)(2) were examined by spectroscopic, electrophoretic, and hydrodynamic methods. The spectroscopic data were analyzed with McGhee, van't Hoff, and Gibbs-Helmholtz equations. In a comparative study, [Pt(CNN)(py)]PF(6) (2; py=pyridine) was prepared and the nature of its binding towards DNA was investigated [preliminary results: ChemBioChem 2003, 4, 62-68]. For reactions with calf thymus DNA at 20 degrees C, the intrinsic binding constants for 1 and 2 are (4.6+/-0.2)x10(5) and (2.3+/-0.3)x10(4) mol(-1) dm(3), respectively. Results of DNA-binding reactions revealed that 1 and 2 preferentially bind to the AT sequence of duplex DNA. Intercalation is the preferred binding mode for 2, whereas both intercalation and minor-groove binding are observed for 1. Complex 1 is cytotoxic against a number of carcinoma cell lines, including KB-3-1, CNE-3, and HepG2, and remains potent against multidrug- or cisplatin-resistant KB-V-1 and CNE1 cell lines, for which the resistance ratios are 1.6 and 1.5, respectively. Importantly, 1 is almost an order of magnitude less toxic to the normal cell line CCD-19Lu (IC(50)=176+/-1.7 microM) and it selectively induced apoptosis leading to cancer cell death with less than 5 % detectable necrosis.     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>     

Surface and Subsurface Oxygen on Platinum in a Copper Perchlorate Solution

The formation of an adatom layer on polycrystalline platinum and the three-dimensional nucleation of copper in a copper perchlorate solution are studied by cyclic voltammetry at 0.1 V s^–1 while varying potential ranges and by recording potentiostatic current transients. About 0.6 monolayers of copper adatoms are deposited when cycling with anodic limit E _a = 1.35 V, the process is slower than that in an acid sulfate solution. Decreasing E _a accelerates the process (nearly one monolayer forms for E _a = 0.80–0.95 V in a cathodic scan) due to an increased number of active centers (metastable copper oxides) and, probably, to a change in the platinum surface microstructure. Oxygen for copper oxides is presumably supplied by water molecules adsorbed on a monolayer of copper adsorbed atoms and by subsurface oxygen (O_ss), which appears on the platinum surface after the destruction of complexes O_ss–Pt _n –ClO₄. Both the copper nucleation and the deposit growth accelerate at higher concentrations of copper oxides, which form at low E _a. High cathodic overvoltages decrease the number of active crystallization centers due to reduction or removal of copper oxides.     

Protein identification by peptide mass fingerprinting and peptide sequence tagging with alternating scans of nano-liquid chromatography/infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry

We have developed a method for protein identification with peptide mass fingerprinting and sequence tagging using nano liquid chromatography (LC)/Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). To achieve greater sensitivity, a nanoelectrospray (nano-ES) needle packed with reversed-phase medium was used and connected to the nano-ES ion source of the FTICR mass spectrometer. To obtain peptide sequence tag information, infrared multiphoton dissociation (IRMPD) was carried out in nano-LC/FTICR-MS analysis. The analysis involves alternating nano-ES/FTICR-MS and nano-ES/IRMPD-FTICR-MS scans during a single LC run, which provides sets of parent and fragment ion masses of the proteolytic digest. The utility of this alternating-scan nano-LC/IRMPD-FTICR-MS approach was evaluated by using bovine serum albumin as a standard protein. We applied this approach to the protein identification of rat liver diacetyl-reducing enzyme. It was demonstrated that this enzyme was correctly identified as 3-alpha-hydroxysteroid dehydrogenase by the alternating-scan nano-LC/IRMPD-FTICR-MS approach with accurate peptide mass fingerprinting and peptide sequence tagging.     

Crystal engineering of photochromic diarylethene single crystals

Photochromic performance of diarylethene single crystals was controlled by crystal engineering using non-covalent aromatic-aromatic interactions as the directional intermolecular force. A diarylethene derivative with two pentafluorophenyl groups, 1,2-bis(2-methyl-5-pentafluorophenyl-3-thienyl)perfluorocyclopentene (1a), formed stoichiometric co-crystals with benzene (Bz) and naphthalene (Np) by aryl-perfluoroaryl interactions. Face-to-face pi-stacking interactions between the pentafluorophenyl groups of 1a and the aromatic molecules are responsible for 2:1 and 1:1 stoichiometric compositions in 1a/Bz and 1a/Np co-crystals, respectively. The diarylethene underwent thermally stable and photoreversible photochromic reactions in a homo-crystal of 1a and co-crystals 1a/Bz and 1a/Np. The absorption spectra of the photogenerated closed-ring isomers varied depending on the conformation of the diarylethene molecules packed in the crystals. The diarylethene 1a also formed 1:1 stoichiometric co-crystals with different kinds of diarylethenes, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (2a) and 1,2-bis[2-methyl-5-(1-naphthyl)-3-thienyl]perfluorocyclopentene (3a). Both co-crystals 1a/2a and 1a/3a showed photochromism. Although 1a, 2a, and 3a underwent efficient photocyclization reactions in their homo-crystals, highly selective photocyclization reactions of 2a or 3a were observed in the co-crystals. The selective reactions were confirmed by HPLC and X-ray crystallography. Excited energy transfers from 1a to 2a and from 1a to 3a are considered to occur and cause the selective reactions.